Page 13 Mechanical Disassemblies FN902, FN905 and Sensor Board removal Remove 1 screw (T3x8) to take the Duct under the Panel. Holder Remove 2 screws (T3x6) to take the Lamp Ballast Unit off. Press the Point button to move the red frame pointer to the item that you want to adjust, and then press the OK button.
Abrasive cleaners, solvents, or other harsh chemicals might scratch the surface. Cleaning of the filter with a vacuum on a monthly basis will help reduce accumulation of dust buildup. . Q:My image isn’t square or rectangular, it’s more of a trapezoid shape. Press the Point buttons to move the red frame pointer to the Image Adjust Menu icon. Continuous use may result in shortening the lamp life. Interlaced/Progressive Signal Conversion w/3-2 Pulldown The Sanyo PLC-SW35 was manufactured by Sanyo. It was also marketed as: SANYO is now part of the Panasonic Group and officially discontinued its production and sales of projectors in 2012.
Remove 1 screw (T3x8) to take the Holder with the Fans(FN902 and FN905) off. High Contrast Picture adjustment improved in reproduction of the halftones. Use only with a cart or stand recommended by the manufacturer, or sold with the projector.